Volkswagen Passat Forum banner

cup

  1. 2006 Passat 2.0T: CV Axle - how to get inner part (cup) off the tranny

    Volkswagen Passat B6 Discussion
    Need to replace both CV axles of my 2006 Passat 2.0T FWD. Pulled both axles, but the 'cup' stays on the tranny. Is it held by a spring clip and needs to be 'yanked' out? https://drive.google.com/open?id=1iJ2eCi3inmeEZoYNiFizDgZwIhP2sZg6
  2. Replace cup holders in front console B7 Passat

    Volkswagen Passat B7 Discussion
    Hello the cup holders in the front console of my B7 2013 Passat have both come off - the little rotating element that the cup sits on. I bought a replacement unit, like this one...
  3. Cam sensor cup rotor

    B5 Garage
    2002 Passat 2.8 l V6 changed the cam seal and cap and now getting a p0346. I think I put the rotor/ cup thing under the CPS on wrong. Can someone tell me how the cup/rotor is supposed to go on? Thanks
  4. Cam position sensor cup

    Volkswagen Passat B5 Discussion
    Hey everyone, 2002 Passat 2.8 30V ATQ Been trying to find a picture or description of cam position cup proper installation. This car i bought, I see the cam chain adjuster was replaced, I found the chain was at 15 links, but it ran fine. It is now at 16 links, and it ran better before. It is...
  5. B5 Dash Cup Holders Won't Latch

    Volkswagen Passat B5 Discussion
    So there have been issues of B5 cup holders being stuck in the dashboard, but my issue is that it doesn't stay latched in the dashboard, or in simple terms, it doesn't close. I came up with a solution by just taping it closed, and taking it off whenever I want to use them, but I still need the...
  6. H&R cup kit

    Parts For Sale
    Selling a slightly used H&R sport cup kit. I purchased them locally to out on after I took off coilovers but with winter coming I'm not going to be installing these anytime soon. I'd rather free up some cash. Great condition. Rides perfect and not blown. Includes everything from H&R. Can text or...
  7. FK / ST B5 passat cup kit

    Parts For Sale
    Fk springs 1.4 inch drop all around (part number# FKVW037) St Struts (part number # 47170) Less than 5k on them 300 shipped. 250 picked up. Can deliver to sowo
  8. FS: Porsche Cup II 17x7s, Retro Red Metallic, Sumitomo HTR-Z Tires, Light and...

    Parts For Sale
    Complete set with 5x130 to 5x112 25mm H&R DRA spacers (with brand new 19mm RAD ball seat stud nuts) and color matched center caps. Less than 1K miles on tires, only used while I was having my dailies refinished. I finished these myself in my shop paint booth, applied 4 coats of Wurth Wheel Clear...
  9. gear oil in cv cup

    Volkswagen Passat B5 Discussion
    I'm replacing the cv axles on my 04 passat auto and noticed some gear oil inside the cv cups. On the PS I took out the center bolt and cleaned up the mess. I put the bolt back and proceeded to the DS. There was twice the oil in the cv cup on the DS and no center bolt. I assume the oil...
  10. Slim can in the cup holder?

    Volkswagen Passat B5 Discussion
    Passat owner for 8 years and never knew this :homer: "][/URL]
  11. FS: Porsche Cup II 17x7s, Retro Red Metallic, Sumitomo HTR-Z Tires, Light and Sticky

    Parts For Sale
    Complete set with 5x112 to 5x130 25mm H&R DRA spacers (with brand new 19mm RAD ball seat stud nuts) and color matched center caps. Less than 1K miles on tires, only used while I was having my dailies refinished. I finished these myself in my shop paint booth, applied 4 coats of Wurth Wheel Clear...
  12. H&R Sport Cup Kit

    Volkswagen Passat B5 Discussion
    I've just bought a H&R sport cup kit for my 03 Passat 1.8T ...I'm about to install them in the next few days are there any pointers anyone can give me to make install go smoother. I've noticed there are 4 groves on the front H&R shocks that the spring perch sets on..the snap ring is set in the...
  13. SVRA Gold Cup Races at VIR September 27-28-29

    Events & Gatherings
    http://www.svra.com/events/the-svra-gold-cup/ Sent from AutoGuide.com App
  14. FS: H&R Touring Cup Kit BNIB

    Parts For Sale
    Bought these from Tirerack, $687+$20 shipping, never put them on. $600 Manufacturer Part #: 31043T.14 Front and Rear Fitment Ride Height: Moderate Lowering Note: Avg low 1.3"F & 1.25"R. Located in Long Island, NY On a members car:
  15. ECS Tuning Cup Kit

    Volkswagen Passat B6 Discussion
    Does anyone have experience with this type of drop? I'm looking for something that will take up the wheel gap but also maintain a decent ride. I just installed some VMR 708 19's on my car, they look nice but I need to do something about the wheel gap. Any suggestions?
  16. remove front cup holder... with pics?

    Volkswagen Passat B5 Discussion
    I need to remove my suck cup holder and find a great diy in the info base. however, I'm very visual and none of the pics are working anymore..... any other good write-ups?
  17. :: ECS Tuning :: Volkswagen KONI Shocks & Cup Kits - On Sale !!!

    Vendor Marketplace
    Click HERE to order or for more information. Volkswagen KONI Shocks & Cup Kits - On Sale! Need a high performance strut to match your lowering springs? The Koni Yellow has been long known to be the best adjustable performance shock on the market. With their built in adjustments, these shocks...
  18. b5 front cup holder

    Volkswagen Passat B5 Discussion
    So my cup holder will not latch when pushed in. I've taken the cup holder out and it moves fine and the spring pushes it out fine but won't latch closed. There is a small plastic arm that looks like it should be the latch mechanism, but it will not work. There is no spring on the little latch...
  19. Front Motor Mount Cup broken??

    New Member Introductions
    Hey everyone, I'm a little bit confused on how to replace a broken front motor mount cup on my 99 Passat. Help is greatly appreciated!
Top