Search Results for ‘confirm’

I spun the engine to drain the fuel rails and this popped out the front...https://www.drive2.ru/l/451944909822230531/ and broke into three pieces. (d'oh!) I think it is a choke for the V6 engine.... I have a 2000 V6 (2771 cc). Is 078 198 667 VAG the right replacement part number. TIA, Jack

Yesterday I was running errands and (after the second stop) my car would not crank (turn over). All other electrical items were operational. I had it towed home. 2000 VW Passat ATW 210k Once home, I charged the battery, cleared codes, and then followed this guide...

Morning boys and girls, Can someone please confirm some part numbers for me. Looking to add the EU taillights, inner left fog light as well as the EU switch to run it all. So far this is what I have in terms of part numbers for a 2010 wagen. ​Tail lights Right outer :: 3C9945096N Left outer ...

Before I had my rotation done, at 55-65 mph it would shake a lot and vibrate, I had the tires rotated and now the vibration is kinda gone-ish, but now it's more towards the rear rather the front. I need the two new tires, get all four tires balanced/re-balanced, and the alignment in my car is...

Hello all, Yesterday my car randomly died. I'd start it, but I'd have to pump the crap out of the gas to keep it running. Then after that it wouldn't start at all. It would start right up once you would jump it, but after you take the jumper cables off, as soon as you touch the gas, the car...

I've noticed a lot of oil build-up across the differential on the passenger's side of the car. When looking behind the engine block on the passenger's side, there is no evidence of an oil leak other than lot of oil sludge buildup on the PCV tubing/CC Vent valve that runs to the turbocharger...

Im about to change my two outer CV Axels boots and I want to know if the ones from a 2003 1.8t Manual Passat wagon would fit my 2002 1.8t Passat Tiptronic. I know that the Axel itself its larger on the manual but Im wondering if the outer Boots would fit my CV axels.

On my newly aquired FWD 2000 Passat GLX wagon I was originally planning to do the very common 19x8.5 front, 19x9.5 rear but am having trouble finding the wheels I want in the offsets I want without paying a hefty premium. I have one lead but it is still up in the air. I have an apportunity to...

Can somebody confirm me which parts has to be replaced on 1.8T APU from these two diagrams to fix problem with PCV :confused: I think that from 103-90 I need to replace 2, 3, 5, 6, 13, 14 and maybe 9, 10. From 133-27 I need 21, 23, 24, 25, 26, 32. I just do not want to start job and then to...

The procedures for chainging the oil on the DSG states it takes 5.5l when doing an oil change. From the workshop I was informed it tool 7 or 7.5 (can't rememeber which) - but I'm thinking they might have it confused with a "dry" transmission ?.... any ideas?

2004 GLX V6 FWD with 137K bought used right at 100K. Need new tires all around before the snow flies but they are just wearing normally; I came across an issue that needs to be dealt with prior to investing in new rubber. I have recently noticed a vibration in the front end with steering...

I've been reading threads about control arms for days but I'm still not sure where my problem is. My biggest suspicion comes from a clunk I hear and feel from the passenger front. I only get the clunk when starting to roll away from a start and not gentle with the throttle. Normal to medium hard...

Hi all - Finally decided to purchase set of VMR V710 in matte black...I know there are black-wheel haters out there, so spare me the flames! Looking to get them from pyspeed.com On this: Have a few questions: The stats: 18x8.5 ET 35 57.1 bore - I am planning on getting the wheels with...

18x9 +35 all around with 225-40 with 5mm spacer in rear. lowered on H&R Sport. any fitment issues anyone had? should I use 235 instead of 225 or will there be some rubbing over bumps? thanks in advance.

I heard he was working at Palisades VW/Audi (for quite some time).... now, he's a Jack Daniels VW tech.... true?

I talked to one shop and they said I don't need a double din dash kit, that it should be a one-to-one fit from the stock Monsoon radio to the Nav. I've seen images of double din units in similar model cars, I just want to know if it required any other labor other than simply popping out the...

so ive read people using s4 upper control arms and tie rods, got the tie rods but anyone know the part # to the uppers that will fit the passat? tried searching but s4 is too small, and control arm brings 400 pages of not what im looking for. mods should allow s4 through the search filter.

I need to get a replacement bolt that secures the ball joints for the two upper control arms to the wheel bearing housing. The part number I found for it using Vagcat is 4D0407192C. Can anyone confirm if this is correct for me. Here is a picture from the HermanH's suspension write up of the...

I've read plenty of threads on VCG problems and I suspect this is whats going on, I'd like to confirm it with people who have actually experienced this problem though. It's a 99 B5 V6 73k and it's smoking. Not enough to really concern me, but enough to annoy me. It's visible at idling and if I...

My 2000 B5 wagon GLX V6 just hit 90k miles, and I need someone to check it to confirm what to replace So that I can have a rough budget to prepare for this big maintanence I know I have to get the TB and related parts replaced, And I feel the control arm should be changed. Also the coolant...