I am debating whether to install a cold air intake or a catback exhaust on my 2012 Passat 2.5l. Which one would give me the best bang for the buck? Also, by installing either, would it cause the check engine light to turn on, if so how would I fix that?

I have the stock cat-back exhaust from my 1.8t 5-speed 4motion sitting in my garage. I'm moving this weekend so I need to get rid of it. Figured I'd see if anyone wanted it because I'm just going to chop it up and scrap it. It's free, just come pick it up (06335). No leaks when it came off the...

2004 1.8t 120,000 miles, Hey guys , I have fair knowledge on my passat , I am looking to buy a k-4 turbo on ebay , I am looking to upgrade my turbo and install a catback exhaust with catless downpipe, First question ; what is the biggest turbo from k-3 -k4 available that is direct fit ...

Hey guys! I have a 2003 1.8T AWM FWD Automatic, and I'm planning on putting an exhaust on my car soon, and I'm having a few questions. My plan is to get a TT 2.5" downpipe, and then get a muffler shop to custom make a setup with a glasspack resonator, and a magnaflow muffler. I have been doing...

... was installed on a '99 Passat estate 1.8T. Deep, throaty note. $100 plus UPS from 78620. cheers! <br> <br>

Eibach Sport Springs: $100 plus shipping. TT Bora Muffler: $100 plus shipping. 2" cat-back pipe for TT: $50 plus shipping. All OBO. Shipping is from 78736, UPS. cheers!

Did some searching here, on google, and the vortex and cat find a definitive answers. What i have is 99 5spd wagon and got a AWESOME deal from a friend on an neuspeed exhaust but it was on a auto wagon. Question is will the Down Pipe from after the cat fit? I've read a few vague responses in...

I have been looking every where i can't seem to find any! If you guys can help that will be awesome:thumbup:.

So, I got rid of my stock exhaust because I threw on my full 3" custom system. This is the STOCK CAT-BACK exhaust system, 2.25" piping, it came off a 2001.5 B5.5 1.8T FWD. The car was always garaged for the past 9 years, so rust is minimal. The sleeve clamp comes with it, and it isn't nearly...

I am working with a local fabricator to develop a full mandrel bent turbo back exhaust(testpipe, downpipe "cat-back") for my manual transmission Passat. Once the fitment is dialed in we will be selling kits. You will have choice on pipe size, cat or no cat, tip design, stainless or Aluminized...

I am getting together a GB for catback exhaust for your 2.8 and 1.8T FWDs. If you are interested let me know. Wondering if any members have some stock exhaust system they are not using to start engineering and production.:salute:

Im looking for a shop around rva that does custom exhaust work. trying to get a catback on my b6. if you know a good place let me know. trying to save some $$ instead of buying a catback from apr. thanks!

What are ppl running are far as Catback systems for 2.0T model?

Just got home from the shop:driving: a little bit ago where i just got a 2 1/2 inch exhaust made up, and all i have to say is wow!! that really makes a difference. I don't know if it's just because i had a hole in the flex but man this thing is so much better, now it's time to chip it :thumbup...

(W8Forum guys.....stand down ;)) Hey Guys, I was just quoted a price for the following: -A complete cat-back custom setup including 2.5" pipe, -Slip welded seams, -A Magnaflow dual-in/dual out mid muffler/resonator, -Two Magnaflow 14" muffs for the rear with stock tips welded back on...

Does anyone have neuspeed cat-back exhaust? What are your imprecions?:)

Does anyone have neuspeed cat-back exhaust? What are your imprecions?:confused:

ok, I've looked around here some and I see alot of magna flow being used. I also know the hpa R32 uses HGP cat back and down pipe. who makes the best cat back for the 1.8T? we're looking for a 2.5 cat back with a resonator