Search Results for ‘case’

Need help. My sons 03 passat needs new breather hose that comes off the back of the valve cover. Would like to find a kit to replace all the silicone molded hoses. Anyoneknow of a kit that would do this and not break wallet.

Ok so I am driving down the road and all of the sudden I am producing a smokescreen. I whip to the side of the road and I have oil coming out of the bottom of the turbo just to the front of the return line and between the case halves. I am pretty turbo stupid but the car was not running...

Picked up a basket case 2003 1.8T. The PO tore into it pretty good (removed the head) and started to put it back together but didn't finish. I pulled off the radiator to check the timing just to make sure it was all good, there were several screws and bolts missing in various places and the...

I'm pretty sure it's my SAIP hose. And not only is it falling off, but it threw off my serpentine belt so it's a whole rib moved over on the top but normal all the way around? I know that Jose is very VIN specific so I have no idea how to replace it or find which hose it is. 2002 V6 ATQ. Should...

hi all i have a 2006 skoda superb 1.8t, technically the same car as the b.5.5 passat albeit slightly elongated.I've posted my problem on several forums to no avail.been hearing this knocking noise,more towards thuds actually that seems to be directly proportional to wheel speed. only happens...

If you were wondering if you can use an SDHC card, the answer is yes. Previous models were hit and miss (more miss than hit IME) but I've tested and had success with a 32gb SDHC.

On February 24, 2015 I took my 2003 VW Passat 1.8 Turbo to the dealer because the car was shaking/vibrating and the check engine light was on. I decided to have the following completed: 1) Crank case breather hose: check valve 06B 103 245 2) Valve cover gasket and cam adjuster seals 3) Fuel...

Saved money by buying the pcv suction pump hoses vent separate cannot find crank case vent(pcv) valve please help

Bought enverything I needed but tried to save money by purchasing from a few diff companies, result-no directions. For the life of me I cannot find the crank case vent please help asap

After 10+ years of use, both of my switchblade keys are pretty beat up so I'm looking into options to just replace the outer case. From what I see the the key blank is secured by a roll pin and the circuit board lifts out; I should be able to remove the pin and lift out the circuit board and...

What kind of issues would I run into if I don't have one? Mine broke off and it has nothing there atm 1.8t aeb

To be sure I have the post I needed to validate my account . Thanks for the warm welcome from some of the members. :) :)

A couple months ago I took my B6 2.0T for tire rotation and wheel balance. It wasn't too long that my wife had told me the car started making some humming noise that was getting worse with speed increase. I took the car for a ride and it did sound like it was coming from tires. I just figured...

On my 2000 Passat w/Triptonics trans code:EFP because its leaking gear oil due to hitting a rock on the road. I believe satan put it there till this day :icon_eek: but anyways, do you guys recommend this at all? I was just planning on buying a new tranny :banghead: but my machanic brought up...

If i turn the motor over by hand i can only get the mark 1" from the line on the belt cover, but the motor turns over no problem using the key, How do i get them to line up or is are they close enough i have no idea:banghead:

Recently I picked up a couple of new 3-button switchblade key cases because I had worn both of mine through the red panic buttons. They were über cheap on amazon, I think $11.99 each. So I rolled the dice and so did a number of other PWers. They arrived today and I am pleased to report that...