I recently acquired an '02 Passat 1.8T Wagon (auto) w/ 175k miles in really nice shape (runs and shifts flawlessly, not even a door ding) except that the oil pressure light flickers above about 2500rpm. It needs an ABS module, but other than that, it's great. I assumed (dumb, I know), it was...

Hi - not sure if anyone has run into this for their Passat B6, but I had a question about turbo boost expectations, the updated rev "D" diverter from VW, and the Go Fast Bits diverter upgrade and some alternatives I found. Last year, I had an issue where I was losing boost and power and it...

Hi all - I am working on the pax side bank. I managed to remove all cam caps and the camshafts, but the T30 fastener on cap 7 is going to be impossible to torque back down properly due to the proximity to the body metal. I just about ruined the bolt extracting. The gap is too small for a T30 bit...

I am in the middle of changing ATF and filter and the last Torx bits is stripped. This is definitely a bummer. Any advise as what I can do to get it removed? Thanks.

I figured I should post this here since it's not Passat content. I've got a set of beige rubber floormats (Mercedes brand), and a beige rear cargo cover from my mom's 2008 Mercedes GL450. She sold it a little over a year ago but they forgot to take these parts out of storage, so they gave them...

Looking for replacement knobs for Pia, I came across this site: Tachoringe.de Don't know how I didn't find this years ago... I have always wanted clean silver/chrome trim rings for speaker grilles and defrost vents. Now I don't need them, but I thought I would share the find. :thumbup:

Hey all, Been a while... however, I'm trying to get myself debt free so I'm looking to get rid of any extra parts I have laying around... So I figured I'd start with spare passat parts. All prices are best offer, local preferred as they are all larger... but will ship at buyers expense. Can get...

Looking to get rid of these items, so everything is priced cheap and as always OBO for anything. You can contact me via PM or email at [email protected] I am on here all the time so you'll hear back from me pretty quickly. I am located in Raleigh, NC. All prices are OBO, and shipping generally...

over the weekend, I was working on the 98 A4 that's been taking up space in my driveway for a bit. One of the last things I had to do before putting it back together was remove the pinchbolt on the passenger side. to facillitate this, I tried heat and beat, hammer/vibrations from an air chisel...

Hi all joined before but forgot details :| but joining again now as I'm breaking my Passat b5 1.8t and just bought a golf mk4 gti so a few bits people are selling will be of use ! :) want anymore let me know everything bar engine as iv only got the block down no head ! Open to offers on...

all 4 interior door handle plastics, both rear door seals with grey cloth strip intact and clean, aeb plastic engine cover with screws and emblem, all 4 door external rubber 'sills' with no rust inside, rear sun shade...

Little spring cleaning today B5 grill no emblem good condition $25 shipped obo Used crank pulley straight just dirty B5.5 v6 $50 shipped obo Used b5.5 v6 powersteering pump and reservoir together works bought from junkyard never needed it $50 shipped obo Don't really need these at all...

Hi, 2003 Passat 1.8t wagon 120,000 I have been reading about the Passat Dipstick tube/funnel replacement. <RANT_ON> WTF, Cheap POS Plastic tube? I thought these were supposed to be well engineered cars? No other car I know of do you have to worry about your dipstick tube...

have a look under my username in classifieds; heavy duty control arms foam lance

Am looking for some bits and pieces for my daughter's passat: Climate control trim-don't know if this is one or two pieces with one piece going around the whole panel and another for the A/C controls. Then again, will it even fit with her after-market radio? Body panel- there is a little...

Anyone know where to get them or would care to loan me them for a few days? I am trying to fix my door locking problem and need to get inside the door, but there are those pesky star nuts.

This is on my 2005 Passat TDI with 150000km on it, owned since new. A couple of weeks ago, the day after a completely shampooed, vacuumed, and wiped down the interior, after a quick trip to the grocery store and back, with AC running, I found a little piece of a black foam gasket on the front...

I just had the STaSIS rear-anti-roll bar and stainless steel cat-back exhaust system installed yesterday at Steven's Creek Audi. They did a good job of the installation and so far, I'm happy with the results. Here are just a few pictures I took: I didn't get a chance to take pictures of...