Volkswagen Passat Forum banner


  1. Parts For Sale
    I have 2x of the plastic belly pan originally sold by the guy in Charlotte (won't say his or company name). They are still in the plastic, but I have no need for them as I no longer have a B5/B5.5. $30 for both if you pick them up in Greensboro, NC. I will meet somewhere close to Greensboro...
  2. WTB/WTT Section
    I had a Thor Skid Plate on my B5 wagon, but I didn't transfer it to my B5.5 wagon. The OEM plastic belly pan was taken out by a large chunk of ice. I live in northern Wisconsin, but I make frequent trips to Minneapolis, Madison, and Milwaukee.
  3. Volkswagen Passat B5 Discussion
    Do you have a belly pan for your car? If you have a belly pan, do you keep it on? Sometimes after changing the oil I question whether I should replace the belly pan or leave it off.
  4. Volkswagen Passat B5 Discussion
    Hello folks I have a 2002 VW Passat with 2.8l v6. Yesterday I replaced all the mounts on the car, man what a difference that made... Anyways, in order to do the job I had to remove the belly pan, or front bottom engine shield. The pan is very damaged, and was wondering what it's purpose is...
  5. Volkswagen Passat B5 Discussion
    I have searched this and have gotten floods of plastic belly pans being needed/not needed posts. I am curious as to how low you need to be to justify buying/adding the weight to your vehicle. For reference my old 99 eclipse was slammed. I mean front bumper couldn't fit a pair of vans classic...
  6. B5 Garage
    Hi Guys, my plastic belly pan today ripped after I believe the nut that hold the front mounting point got off the bolt and got caught on something when I drive in the gravel road. My question, is this plastic belly pan the same between models or each has different one? If this part is the same...
  7. Volkswagen Passat B5 Discussion
    New parts delivery, aka 6th pre Christmas, Christmas Day of the year. It's so pretty... Some Sill Foils: Jack Pads: If anyone has a spare right rear one of those foils, please let me know... Rear Mat Retainers:
  8. Volkswagen Passat B5 Discussion
    So, after i blew a great big hole in my oil pan the other day i think it's time to protect it a little better. I really love the look ot the "Thor" pan (and the fact it's named after me :P ), but I'm a bit scared for what shipping will cost and can't find a source up here in Norway. Anyone know...
  9. WTB/WTT Section
    Looking for the plastic tray that mounts below 1.8T engine; with or without mounting hardware I'm located in CT, willing to pick up in northeast Regards, Dave
  10. WTB/WTT Section
    Will pick up. Thank you
  11. Parts For Sale
    These came off my '99 1.8(AEB). The Thor was from JaytheSnork off of his Passat. The OEM belly pan (engine sound dampener) is straight from the dealer with ALL (plus extra) fasteners with only about 100 mis. on it - absolutely cherry condition without a crack or any breakage. The glove box...
  12. Vendor Marketplace
    Click HERE to order or for more information. Volkswagen B5 Passat Belly Pans - Starting At $99.95! If your belly pan is belly-up in a drainage ditch in Des Moines, it's time to install a new one! More than just beauty covers, plastic protection panels keep water, ice, dirt, and road salt out...
  13. WTB/WTT Section
    As the title states, I'm looking for an OEM belly pan and front bumper cover for a b5.5. Some-what-local pickup would be preferred due to the size of the parts. I'm located in southern CT near New Haven. Please let me know what you have! :thumbup:
  14. Volkswagen Passat B5 Discussion
    You won't believe this. my belly pan fell off as i drove over a small speed-bump. i noticed i was missing a few screws, only had two left. so i went to the same stealership who screwed up my oil change to get the screws. they want $5 for each screw. i'm like :crazy: you guys know anywhere i can...
  15. Volkswagen Passat B5 Discussion
    Does anyone know what size/or where I can get a set, I just noticed today that my belly pan is missing, and the bolts are gone as well, so my clip is not connected to anything.
  16. Parts For Sale
    This is PN 8D0 863 823 L (per PN molded into pan), PN 8D0 863 821 S (per PN on invoice dated 04/12/12) in perfect condition with all fasteners plus extras. This came off my '99 1.8T AEB engine when I installed a Thor Skid plate. Along with the belly pan is a baggie with extra fasteners, washers...
  17. WTB/WTT Section
    Hoping some of you Thor converts still have your old hardware. Looking for all of the pins and all of the pin retainers. If you have a rear bracket, that would be icing on the cake. Shipping to 53214.
  18. Volkswagen Passat B5 Discussion
    it's mine. Also, my apologies if, as you were driving, my belly pan decided it was going to enter your car through your windshield. I've had this car since 2008. Decided to put on a belly pan 2 weeks ago. I didn't have the hardware set, so used 2 zip ties in about 8 or 9 spots to hold the...
  19. B5 Garage
    Hello, i have an 02 passat 4motion. my wife recently dragged or running over something. anyway its caused the driver side of the front bumper to pull out about an inch. i believe the screws holding the front bumper in place by the the driver side are missing and the hole that the screws going...
  20. Parts For Sale
    Withdraw sale offer--shipping too much $$$ Withdraw sale offer--shipping too much $$$--Mods please delete