Volkswagen Passat Forum banner

bar

  1. Will a b6 S4 front sway bar fit a b5.5 Passat? And is there any benifit?

    Volkswagen Passat B5 Discussion
    I grabbed a b6 S4 front sway bar in the yard. I noticed when I got back that the ends were slightly different. Don’t know if anybody has had any experience with suspension upgrades. I’ve already done ST coilovers and C5 A6 uprights and lower control arms. Still feels like the front end needs a...
  2. B5 CAI/FMIC/Skidplate/Booser/Corbeau seats/sway bar

    Parts For Sale
    $75 Evolution Motorsports CAI SOLD $50 MTTuning FMIC $50 Dieselgeek skid plate $100 CF Booser hood (will need to be painted) $80 Neuspeed front sway bar $100 Corbeau reclining race seats -seats will need to be cleaned -brackets included All prices are PayPal gifted. Buyers pay...
  3. wtb4 2012 cc vr6 stock sway bar Poly bushings non lube type where to buy, not ECS

    Volkswagen Passat CC Discussion
    have stock sway bar and would like to put polyurethane bushings but the non lube type and not from ECS tuning. thx
  4. Front sway bar replacement

    Volkswagen Passat B7 Discussion
    My wife has a 2012 S model with the 2.5L 5 cylinder and one of the brackets that mounts the sway bar to the subframe broke. You can't replace just the brackets because of piss poor design (bracket is welded around the bushing) so i bought a replacement sway bar. From what I'm reading, I'll...
  5. 2012 cc vr6 4motion sway bar links brand. Moog or Meyle Hd?

    Volkswagen Passat CC Discussion
    Hi All Any recommendations on which one to choose? Everything stock and want to keep it that way. What makes the Meyle HD? Is it just a larger diameter? Any experience with either of the 2? Thanks..
  6. B5.5 FWD REAR Sway Bar RSB Anti roll bar

    WTB/WTT Section
    Hey folks looking for a b5.5 FWD rear sway bar. PM me
  7. sway bar

    Volkswagen Passat B8 Discussion
    would the 24mm rear sway bar from tire rack help the under steer on a 2018 type r Passat a bit
  8. C5 A6 strut tie bar... fits b5/b5.5

    Parts For Sale
    I have a C5 A6 strut bar for sale. The C5 A6 factory strut bar fits the b5/b5.5 Passat with a little modification.* Includes the bar and two mounting brackets.. *Can explain the mod if needed $80 shipped Will add pics..
  9. :: ECS Tuning :: NEW! ECS Billet Rear Sway Bar Mounting Kit

    Volkswagen Passat B7 Discussion
    Not only are factory sway mounts unsightly, they are also weak. Any extra play in your suspension means power that is not being transferred to the ground. Make up some of that lost input with the billet replacements for your VW. Made from billet aluminum, these mounts not only look more...
  10. :: ECS Tuning :: NEW! ECS Billet Rear Sway Bar Mounting Kit

    Volkswagen Passat B6 Discussion
    Not only are factory sway mounts unsightly, they are also weak. Any extra play in your suspension means power that is not being transferred to the ground. Make up some of that lost input with the billet replacements for your VW. Made from billet aluminum, these mounts not only look more...
  11. Sway bar and uneven tire wear?

    Volkswagen Passat B5 Discussion
    I had removed the sway bar and drove like that for quite some time. ( it feels smoother) as I decided to put it back on I realized that the inner edge of the front right tire is worn out considerably. Does driving without sway bar cause it? Or simply an alignment issue?
  12. Front stabilizer bar on a 2008 Passat B6 bushings

    Volkswagen Passat B6 Discussion
    Hi all, Anyone knows if the bushings on the front stabilizer bar on a 2008 Passat (B6) can be changed? or the only solution to front stabilizer bar problem is to change the whole stabilizer bar? I am asking because the I have an issue and the dealer, as usual, is asking to change the front...
  13. So this Passat walks into a bar...

    New Member Introductions
    "I'll have a 5 quarts of beer and a new crankcase valve gasket."
  14. NEW keithbloom/SRS rear sway bar for FWD B5/5.5

    Parts For Sale
    Sold
  15. FS: Yakima Whispbar S43 Rail Bar Low Profile Low Wind Noise Roof Rack

    Parts For Sale
    Used Yakima Whispbar S43 Rail Bar Low Profile Low Wind Noise Roof Rack Bought it for quite a bit more a couple years ago. Shows regular wear but works perfectly! Guranteed...(tested) Works on VW Volkswagen Passat Wagons made between 1998-2005 (B5 generation) Located in Norton, MA $200...
  16. New Wagon Owner, availability of rear sway bar options?

    Volkswagen Passat B5 Discussion
    New 1.8t wagon owner here - been searching past threads and seems like there's plenty of enthusiasm about adding a rear sway bar. My question - is the only bar still available the autotech one? Seems like the SRS bar is long gone, Nuespeed no longer makes theirs and/or I can't find any vendors...
  17. FS: keithwbloom SRS style rear sway bar, 034 motorsport trans mounts, maybe more

    Parts For Sale
    I have a few things that have been sitting in my parts area for too long that deserve a new home. More stuff may be added later and I'll post pics when I get a chance. All shipping prices to lower 48 First up is a keithwbloom SRS style rear sway bar. If you've been around here a while you know...
  18. Replacing front sway bar bushings

    Volkswagen Passat B6 Discussion
    Im getting some clunking noises on the front passenger side of my 2008 Passat. Its only when I go over uneven surfaces/pot holes. If I go over a speed bump and both wheels hit it at the same time, there is no noise. I bought sway bar end links for both sides, but I haven't installed them yet...
  19. Help wiring an led bar on my Passat.

    Volkswagen Passat B7 Discussion
    Wanting to run an led bar on the bottom grilled of the car, not to blind anyone just for looks and the occasional use. I want to tap into the fog lights, what would i need to do this? Would i have to change the fuse box?
  20. Camshaft pulley turned after removing locking bar and TB. Help needed.

    Volkswagen Passat B5 Discussion
    The passenger side camshaft pulley turned about 30 deg clockwise. I read up before posting and it seems to happen occasionally when the bar is removed. I have the pin in and tried to turn the crankshaft with the pin in to ensure it was locked and it didn't move. I loosened the bots with the...
Top