Hi everyone i know that this thread has been covered but when i look at these older threads it seems that at the time no one has really got a real experience with the density Control arms of 034 motorsport. Like everyone knows the Passat B5 don't have a camber kit so the best option is to...

ECS Adjustable Clutch Pedal Stop | VW 5 & 6-Speed Trans Eliminate dead pedal travel in your VW with our Clutch Pedal Stop! This new stop from ECS improves your launches and shortens your shift time with the decreased clutch pedal travel and is perfect for anyone looking for a more engaging...

ECS Adjustable Clutch Pedal Stop | VW 5 & 6-Speed Trans Eliminate dead pedal travel in your VW with our Clutch Pedal Stop! This new stop from ECS improves your launches and shortens your shift time with the decreased clutch pedal travel and is perfect for anyone looking for a more engaging...

I got my hands on a alignment specs book for all the cars at my job (work at spring and alignment shop), and found there that i may possibly not need adjustable control arms to get rid of camber through mcpherson eccentric bolt that mounts on a strut. It's new to me, i feel like if it was that...

Im interested in buying an adjustable fuel pressure regulator , since when i replace anything old i always upgrade. I would like to know what the OEM fuel pressure for the 99 1.8t AEB engine sits at, im sure this adjustable one is not pre adjusted.

Hi Passatworld – has anyone done the SPC (Moog) adjustable control arm “upgrade” recently? I did and I’m a bit concerned with the results. The ball joint ends of each arm are striking the upper wheel wells. Not good! I asked for, and got, a very good “1BE” Factory Sport alignment spec except for...

I'm considering a set for my 2002 4-Mo to correct a negative camber problem that has become worse over time as the lowering springs installed in 2013 have settled in to about a 40 mm drop from stock. Has anyone installed these and how long ago? What is their joint/bushing quality like as...

. .

PB coilovers, for all 2WD passats Independent high adjustment and pre-load adjustment (no loss of travel even at max drop) 30 point damping adjustable light weight aluminum body for less un-sprung weight. 9k (503lb) rear springs, modified perches for extra lowering. Stock 12K (671lb) front...

I'm swapping out a set of Koni yellow adjustable shocks on a 2001 B5. I found how to do the adjustment and it needs to be done before the shocks go on the car. What settings are good for regular street driving (not racing)? This car also has a set of sport/lowering springs that drop it 1 or 2...

Anyone ever used an adjustable diverter valve?

I just completed the installation of adjustable upper control arms. This turned out to be a months-long, frustrating exercise with (finally) a great outcome. If anyone wants a consultation on what is involved with the selection and installation of adjustable upper control arms, feel free to PM...

Picked these last week. They are a pair of the power-folding (will fold themselves when switch is turned to 3 o'clock position), power-adjustable, heated mirrors from a B5.5 2004 GLX. They also support position memory function with a compatible CCM. All cleaned up. Candy White mirror caps, but...

SOLD! For Sale: Passat Rear Lowering Springs & Adjustable Spring Perches I had installed Koni coilovers on my Passat and the rear ride height on the Koni's is not adjustable. The drop was a little too much for the road around here and I was scraping over speed bumps. I was looking for a...

Posted on SCAudi today for anyone hunting an SC. ECU has SAI disabled, it is for an AHA (B5) ECU, if you have a B5.5 with an ATQ engine, you will need to get your ECU flashed by PES (at an additional cost). Seller (not me!) is asking $2500 for whole package. Located in South Carolina.

SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD I'm selling my FK Silverline coilovers. The whole kit, new in box. These are $950 new from ECS Tuning. They are stainless steel, fixed dampening and adjustable height: which is ideal for long term adjust-ability. I had originally planned on lowering...

Requirements: 10 sets I was speaking with Mike @PureMS. Just gaging the interest on a control arm set. I was informed by Mike that I can't list the GB price "publicly." With that in mind, I understand price is a motivating factor in whether to buy something or not. I'm not going to try and...

Have a 1998 b5 1.8 Passat, cannot find out how to install my JDM adjustable fuel pressure regulator. Can anyone help with a writeup please? Need it installed so I can get my Giac pc16 software