Search Results for ‘28l’

I managed to get a P0411 code that had an obvious cause after inspecting my vacuum hoses. (Hopefully it won't have a secondary cause, but it was ok until I was messing around with a speedwrench to remove the top flange nut. Apparently trashed the little vacuum elbow on the combi valves.) So I...

Well guys I'm at my wits end with this no fuel problem. I checked fuse 28 good, Read some where here if you get a blink on your test light at 28 when cranking that means everything upstream good. I had no sign of it trying to run at the pump so I replaced it still no fuel. I 'm trying to get at...

I'm getting a P0431 code. The car has 112k miles and all four sensors are original. I'm sure they are long overdue for a change. I use an app on my phone and I can show the 4 sensors on individual graphs. The graphs show the pre-cat B1S1 & B2S1 voltage moving from a .i to .9v. If I understand...

Does anybody have any idea if the rear subframe will fit from other 4motion vw's from same era ?

B5.5 Passat 4Mo 2.8L - Help ABS Light - UPDATED So I have done a lot to this adopted car in the last three weeks and she is running very well. Done so far: VCGs Plugs Purge Valve PVC Check Valve Fixed broken vacuum hoses Camshaft position sensor ECT sensor 2x1 O2 sensor Cleaned PCV hoses...

Hey there all. I am a noob, but a relatively fast learner and pretty handy. This is my intro post: https://www.passatworld.com/forums/new-member-introductions/450697-noobs-all-must-read-first-post-make-entry-thread-v2-117.html#post4510377 That gives a good intro to why I am here without...

I just wanted to know what Brake fluid I should use, I know it's Dot 4, but is there a preference in Brand?

Help, I am pulling my hair out trying to get this car to pass Oregon emissions inspection! I have VCDS. I bought this car at auction where it had a CEL (as well as an ABS fault but that is for another thread). It has 127k miles, and according to the prior owner (who traded it in to a dealer)...

What tcu(part number) does fwd v6 2.8l 30v b5 2000 passat use..

I am rebuilding the heads due to bent valves, and need a few torque specs. My head bolts are the T30, Non-stretch. Dont know if that makes a difference. Specs needed: Cam caps Head bolts Exhaust manifold Intake manifold Thanks!

Hey guys, I'm replacing the whole exhaust and now roadblocked by the skinny passage as the pipe heads up to the manifold. There is no way that pre-cat and flange will make it down. Am I to lower the subframe, supporting the motor? I tried to find help in multiple searches but only found a...

Hey everyone, I finally joined the VW world with a new to me Passat Wagon! I've always liked Volkswagens, but haven't had the opportunity to own one until now. I work as a Mopar tech in a small dealership, and have always had a passion for cars. VW and Audi has always impressed me with their...

Hi everyone, I was driving home and I did heard the beep about check coolant level....So I get home no noise nothing and I did stop the car, next I did try to start the car and immediately a noisy beep and messager on the dashboard STOP check coolant level, so Yes no coolant because radiator has...

I would like know the pros and cons of the engine v6 30v 2.8l amx.(Reason for doing swap;the turbo and other parts had failed.)

I am having a no crank, no turnover issue, my windows won't work, the keys won't lock the doors, the buttons pop back up. I found out that fuse 14 was blown. Changed it, the car started and worked tool it for a 25 minute run. Got home, switched off, tried to restart, same issue. Fuse 14 blown...

I rarely post or stop by here much these days, but thought some might like this. Guy puts a B5.5 V6 into a Porsche 996 for a 24 hours of Lemons car. https://www.garagejournal.com/forum/showthread.php?t=386298

Hello there. Just bought this 2004 vw passat 2.8l v6 manual-transmission and it said to have weird electrical problems a few weeks after he got this heater core changed. I scaned the car before buying and literally almost all the modules were giving this fault car: Data bus to CCM faulty, CCM...

Has anyone worked on cruise control for this engine? I am pretty sure it's ECM controlled, but it doesn't work. No codes present. Maybe bad connection in switch or brake pedal area?

You can see my local ad here: https://bellingham.craigslist.org/cto/d/2000-vw-passat-glx-v6/6551038369.html Selling a 2000 V6 Passat GLX as a parts car. Asking 750 obo. Will need to be towed away. Clean title in hand. Scrap quotes in hand, don't want to spend a ton of time or effort on selling...