|
|||||
|
|
|||||||
| Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| B5 Garage The specific technical and "how-to" help forum for the B5 Passat. Have a detailed technical question? Post it here. |
![]() |
|
|
Thread Tools | Search this Thread |
|
#1
|
|||
|
|||
|
It's really easy, you only need one picture.
All the tools you need is a #20 Hex Star and a thin screwdriver. The bezel that fills in around the climate controls (greenish) pops off. Behind it is 4 screws. Underneath the radio in the "mini-cargo" area as another 2 screws. Take the 4 screws (magenta) and it will pull out. Behind the climate controls 2 screws don't need to be removed.
|
|
#2
|
|||
|
|||
|
you must have an early model b5. in any event, you'll need the radio removal tool if you want to remove the radio alone.
|
|
#3
|
|||
|
|||
|
I tried inserting a removal tool into the radio an it would not fit up top. The clips for the stereo are on the side toward the bottom.
|
|
#4
|
|||
|
|||
|
You need two tools to remove a double DIN and four for the single DIN. Also, the tools for the single and double are dfferent.
|
|
#5
|
|||
|
|||
|
you can make your own radio removal tool for the single din:
http://www.passatworld.com/forums/sh...center+console |
|
#6
|
|||
|
|||
|
Don't be cheap and do it this way. I have seen HUs ruined using it. Spend the $15 and do it right. You will make a lot of friends loaning out your removal tools.
|
|
#7
|
|||
|
|||
|
I Removed and installed my own headunit no problem, if you get something from crutchfield they give you all the necessary tools
|
|
#8
|
|||
|
|||
|
Quote:
< S E T U P > Link . . . . . . . . .| My 99 Variant Stereo . . . . . . .| Climate Controls Coin Tray . . . . .| Stereo Climate Controls | Coin Tray |
|
#9
|
|||
|
|||
|
Quote:
|
|
#10
|
|||
|
|||
|
Quote:
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|