I recently purchased a 2005 , B5.5 Passat in Australia . I have changed out the Factory Gamma HU and CD Changer for a Touch Screen Double Din unit . I wanted to retain the Steering Wheel Controls so I also purchased an Axxess Interface (ASWC-1) . I connected everything in place then went to install the ASWC-1 only to find the instructions on which plug and wires to connect it to don't exist in my car . Apparently I have a 1787 Shell plug , not a 9003 Shell Plug . I cannot for the life of me get the damn thing to work so hoping someone has come across this before .
Is there only 1 remote wire that goes to the head unit ?
This is the HU that was in my car -
This is the diagram from the Gamma HU and the plug which houses the "Rem Con" wire , the purple one -
and the Steering Wheel Controls -
Can anyone shed any light on if the controls can be connected directly to the new Kenwood HU or what wire(s) need to connected to the ASWC-1 Interface .
Thanks in Advance
Todd
Is there only 1 remote wire that goes to the head unit ?
This is the HU that was in my car -
This is the diagram from the Gamma HU and the plug which houses the "Rem Con" wire , the purple one -
and the Steering Wheel Controls -
Can anyone shed any light on if the controls can be connected directly to the new Kenwood HU or what wire(s) need to connected to the ASWC-1 Interface .
Thanks in Advance
Todd