CAN Gateway coding problem

+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    4th Gear
    Join Date
    Feb 2013
    Location
    Bendigo, Australia
    Posts
    4,510

    Question CAN Gateway coding problem

    I have a problem with my CAN Gateway coding on my 2000 Passat 3B-B5 2.8L 30V APR

    Address 19: CAN Gateway Labels: 6N0-909-901-19.LBL
    Controller: 6N0 909 901
    Component: Gateway K<->CAN 0001
    Coding: 00005
    Shop #: WSC 30067
    VCID: F0930DCEA3BB
    1 Fault Found:
    01044 - Control Module Incorrectly Coded
    35-00 - -

    Can anyone help with the correct coding or how I can get it?
    Does this mean the CAN Gateway is incorrectly coded, or one of the modules connected to it is incorrectly coded?
    Note: This is not causing my other problem, this existed long before the Rough running etc. started.

    Any help would be great thanks.

  2. Remove Advertisements
    VW Passat Forum
    Advertisements
     

  3. #2
    4th Gear
    Join Date
    Oct 2002
    Location
    Campbellsville KY US
    Posts
    3,886
    You may have to log into the module to recode it... IIRC, the info is on ross-tech's website. Is the gauge cluster original to the car? The correct coding is determined based on certain features in the car, such as ABS and traction control.

  4. #3
    4th Gear
    Join Date
    Feb 2013
    Location
    Bendigo, Australia
    Posts
    4,510
    PROBLEM CORRECTED

    From Ross-Tech
    19 - CAN Gateway: -- KWP-1281
    VCDS Works fine. This is physically located in the Instrument Cluster, but functionally it controls communications on the CAN-BUS.
    Look at the last digit in the coding. Add the values for the options together to get the correct coding.
    0 - No available equipment
    +1 - Automatic Transmission
    +2 - ABS Brakes
    +4 - Airbags
    So, if you want to support Automatic Transmission, ABS Brakes, and Airbags, (add 1+2+4 = 7) = 00007.

    I recoded with VCDS-Lite and the DTC is gone.
    Does this mean my ABS was not working properly?

    Thanks for your help soundguybob

  5. #4
    4th Gear
    Join Date
    Oct 2002
    Location
    Campbellsville KY US
    Posts
    3,886
    I'm not certain if not having those options coded in the CAN gateway disables the feature, or if it's simply a matter of which modules the cluster is "looking for"... Will ask around to some of the "cluster guru's" and see if anyone knows.

  6. Remove Advertisements
    VW Passat Forum
    Advertisements
     

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.
If you do not want to register, fill this field only and the name will be used as user name for your post.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBadvanced CMPS v4.1.2