hey Guys, thanks in advance for reading and any input will be greatly appreciated!! I got a 2000 Passat V6 2.8 and this thing will not start! engine turns over but no start! I've checked timing and that's good, There's no spark coming out of the Coil pack so i know it is in fact a spark issue. I pulled the coil pack out of my friends 2000 passat that runs perfect nad still no spark, so i tried his ECU (luckly the same exsact part numbers) and again, no start w/ his ECU. i put my ECU and Coilpack in his passat and it starts perfectly. I was looking for the ICM (ignition control Module) on these cars but i do't see one. Does anyone know if the V6s have ICM? i know the 1.8Ts and 2.7Ts have them but i don't know about the 2.8 V6. If it has one please let me know where it's located, if it doesn't, please give me some input on what could be the problem. Is there anything between the ECU and Coilpack in these cars? Thank you so much in advance, Hopefully someone can give me some light here!!