1998 B5 AEB Part out - Beige Interior & Dark Green Exterior

[theNofJboy]

As the title says, I have a 1998 B5 AEB Full Part out - Beige Interior & Dark Green Exterior

I am working on taking out the engine, which will be for sale later on but everything else is for sale now. I will be shipping from NJ - 08809. I have tons of spares parts laying around too, including a blown KO4 with port & polish exhaust housing


Off the top of my head, I do not have door cards or center arm rest lid.








Aftermarket Snub Mount - I think its APR


SOLD ITEMS
ECU
Intake manifold
Wiring Harness
Driver door shell
4 stock side skirts
All the grills
Sunroof Motor cover
Passenger side visor
KO3
sunroof controls
AEB head
AEB block
Throttle Body

[Bdubskii]

How much would you be looking to get for the cylinder head?

[theNofJboy]

I gotta check my receipts but its got to be inspected before I sell it like I said. Once its inspected, I'll provide all the details but when I got it rebuilt, there were no bent valves, new valve guides, new valve seats, 3 way valve job IIRC. The head was cleaned, pressurized, tested etc..the whole 9 yards. Once its in expected when I remove it, I'll provide all the details. You are 1st in line for for the head.

[Bdubskii]

Thank you sir.

[theNofJboy]

^ as soon as I head the headbolt removal bit, I'll give you an update on the condition of the head.

[Bdubskii]

Sounds good!

[kilaueo]

Are you selling the front seats? My B5 tan leather seats are tearing to pieces.

[theNofJboy]

sorry I dont have a leather interior

[enzoB5]

Condition of right fender, sunroof module, More to follow.

[theNofJboy]

right fender is in good condition. for the sun roof module, you mean just the motor right? I have that but I gotta check the condition

shoot me a PM with your email and I'll send pics of the fender etc..

[my1stturbo]

How much for the wiring to the CCM under drivers foot well if in good shape?

[theNofJboy]

^ The wiring is in good shape. I just sold the CCM so the wiring is ready to come out. How much of the wiring do you want? I know it connects to the CCM but I have to see where the other ends connects. Let me know -

[vbora01]

Woops. Double post.

[vbora01]

Power steering pump? Condition, age, did it squeal? What would you want for it shipped to 27617? Also, the tensioners for the belts, any kind of bearing noise etc? Might be interested in all of them, trying to get rid of the squealing I get in the cold and I'm suspecting the named components.

[theNofJboy]

^ I'll check tomorrow after work for for the PS pump. As far as I know, its the original but it doesn't make any noise and in in good condition and I can send pics too.

Regarding the tensioners, I have them all and there are less than 100 miles on them, same with the timing belt etc. They are all yours, I just need to take them off. Tell me what you need exactly so I can take it off

Thanks

[my1stturbo]

^ The wiring is in good shape. I just sold the CCM so the wiring is ready to come out. How much of the wiring do you want? I know it connects to the CCM but I have to see where the other endsnects. Let me know -

I don't need it all the way back. Figure the plugs and maybe a foot or so of wire if you don't mind cutting the harness. Or however far back you can cut without it being a hassle.

[theNofJboy]

^ PM sent

[Bdubskii]

How's that head looking?

[theNofJboy]

^ to me it looks good but I have to drop it off at the shop that rebuilt it to look it over but im certain it is good to go

[theNofJboy]

TTT -

Whats parts do you need guys??

[A.K.]

what does the driver side mirror switch look like, is it the knob or the disk?

[DerhsLacidar]

what does the driver side mirror switch look like, is it the knob or the disk?

98 should be the disc.

[theNofJboy]

TTT - Tons of parts still for sale. The car is almost stripped of parts

Let me know what you need

[artiemac]

What condition are the sunvisors? If they're in good shape, how much shipped to 20706? Thanks.

Sent from my SGH-T759 using AutoGuide.Com Free App

[theNofJboy]

I only have the driverside visor. Physically its in good shape but I need to look to see if its dirty or not but it can be cleaned rather easy. If its clean, do you still want only the driverside?

[artiemac]

I was actually looking for them for my niece's car. I know the passenger side mirror is busted, but let me check with her 1st. Thanks.

Sent from my SGH-T759 using AutoGuide.Com Free App

[artiemac]

I'm going to pass on the visor, but good luck with the sale.

Sent from my SGH-T759 using AutoGuide.Com Free App

[FamousDan]

TTT - Tons of parts still for sale. The car is almost stripped of parts

Let me know what you need

How about the Turn Signal/Cruise Control stalk from the steering column??? I need one of those, as my original burnt up the "ribbon cable."

[theNofJboy]

^ I have that but I need to get the tool so I can remove bolt that holds on the steering wheel.

I see you are from VT, ready for the storm?! Im heading to Killington tomorrow morning. I am PUMPED to say the least.

[FamousDan]

I have the tool... no rush on my part, as there are several more essential things that should be done before this becomes a real problem.

I'm ready for the storm, but I'm stuck in Phoenix, AZ for business... Had to delay my return flights until Sunday morning in order to try and avoid getting stuck in an airport somewhere. If I have time after driving home and plowing the driveway, etc., I will head to Stratton for some Sunday afternoon runs. You have good timing for your Killington trip, drive safely!

^ I have that but I need to get the tool so I can remove bolt that holds on the steering wheel.

I see you are from VT, ready for the storm?! Im heading to Killington tomorrow morning. I am PUMPED to say the least.